Tini Paddleboard Power Conversion Kit
Transform any weekend paddleboard into a precision e-craft__o tools, no clutter. The SUBLUE Paddleboard Power Conversion Kit locks a Tini power module (sold separately) onto 99 % of inflatable SUPs in under a minute, delivering silent, throttle-smooth propulsion at the touch of a wireless remote.
-
Plug-&-Play Installation _ Slide, tighten, paddle; the 1.14 kg carrying frame secures without drilling or epoxy.
-
Single- or Dual-Engine Flexibility _ Cruise at 3.2_4.5 km/h with one Tini, or surge to 7 km/h with twin engines.
-
45-Minute Ride Time _ Quick-swap lithium batteries keep you exploring; add spares to double your range.
-
Water-Smart Control _ IP-rated remote toggles two speeds; press to run, release to stop__o cables, just Bluetooth.
-
Built for the Elements _ Marine-grade materials, magnetic charging, and 60-point corrosion testing ensure season-after-season reliability.
What__ in the Box
-
Carrying frame & anti-loss lanyard
-
Repeater module & controller
-
Quick-release screw, magnetic chargers, pads, decals
(Single-engine set includes one Tini scooter; the dual-engine set adds a second scooter, support handle, and connector.)
Elevate your SUP _ glide farther, surf stronger, and own every horizon!
Pairs well with
Tini Paddleboard Power Conversion Kit
Paddleboard Power Conversion Kit
Tool-free quick installation.Turn your SUP into an electric board
The mounting frame secures the kit firmly to the tail of the board.The sliding rail lets the Tini power unit slide in and out for fast swap.
Lightweight design, easy to carry.
Premium materials with a skeletonized bracket.The mount stays rigid while keeping the weight down.
Wide compatibility with most inflatable SUPs.
Designed for inflatable boards—enjoy smooth rides on the water.
Wireless control with one-click start/stop
A wireless controller operates the Tini system with stable, easy control.Press to start, release to stop—intuitive and handy.Two speed levels switch with one button for flexible pacing.
※The controller can be mounted on the paddle shaft.
Powerful drive with up to 75 minutes of runtime
The Tini system uses a rechargeable lithium battery.
98Wh pack: typical use about 45 min.
158Wh pack: typical use up to 75 min.
Carry spare batteries to swap quickly for longer sessions.
Rechargeable lithium battery
Smooth power for effortless gliding
Single-propulsion system with two speed modes.
Cruising speed up to 4.5 km/h.
To build this setup you need:
Paddleboard power kit ×1
Sublue Tini power unit ×1
Twin-motor thrust for high-speed cutting across the water
Dual-propulsion system with two speed modes.
Cruising speed up to 7.0 km/h with doubled power.
To build this setup:
Paddleboard power kit ×1
Sublue Tini power units ×2
Dual-mount bracket ×1
Dual-mount connector ×1
| Paddleboard Power Conversion Kit | |
|---|---|
| Mounting frame | 224×225×296 mm (L×W×H) |
| Adapter module | 154×171×250 mm (L×W×H) |
| Controller | 41×70×80 mm (L×W×H) |
| Weight | Frame 1140 g; adapter 650 g; controller 85 g. |
| Speed by gear | Single-motor: Low 3.2 km/h, High 4.5 km/h. Dual-motor: Low 5.4 km/h, High 7.0 km/h. |
| Endurance | Controller: 300 min; adapter module: 240 min. Power unit typical use 45 min (98Wh battery). Typical use 75 min (158Wh battery). |
| Charging time | Controller 180 min; adapter 120 min. Power unit: 120 min (98Wh pack); 210 min (158Wh pack, or 120 min with fast charge). |
| Board compatibility | Material/type: Inflatable SUP, PVC. |
Tail size/shape requirements: see diagram below (dimensions in mm).
※“Typical use time” is measured with fully charged devices under general usage (non-continuous) and reflects the average of maximum achievable time.
※This kit does not include the Sublue Tini power unit, dual-mount bracket, dual-mount connector, or the inflatable SUP.