This product is only suitable for healthy and skilled swimmers over 16 years of age.

This is normal. The motor is not designed to run in air at any speed. For safety, the product reduces speed after 5 seconds when the motor runs in air.

This product has slightly positive buoyancy. When released in water, it will slowly float to the surface.

• Dimensions: 54.4 cm (L) × 37.9 cm (W) × 28.8 cm (H)
• Weight: 8.7 kg (19.2 lb), including the battery.

The operating depth is 0–40 m (0–131 ft).

Toggle and hold the Power Control Switch for 3 seconds.

There are four speed modes:

• First gear: 6 km/h (3.73 mph);
• Second gear: 8 km/h (4.97 mph);
• Third gear: 10 km/h (6.21 mph);
• Fourth gear: 12 km/h (7.46 mph).

Gear 4 is unavailable when battery power is below 30%.
Press the speed button once to move to the next mode; there are four modes in total.
When operating in Gear 4, VAPOR Pro automatically switches to Gear 3 after 2 consecutive minutes. Gear 4 remains unavailable below 30% battery.

• Typical duration: 60 min
• First gear duration: 45 min
• Second gear duration: 30 min
• Third gear duration: 18 min
• Fourth gear duration: 2 min × 5 at Gear 4 + 6 min at Gear 3

Gear 4 delivers top speed for up to 2 consecutive minutes before automatically shifting to Gear 3 to prevent overheating. It can be re-engaged immediately and used for up to five cycles (10 minutes total).

The remaining 30% battery capacity provides up to 6 minutes of runtime in Gear 3. Gear 4 is unavailable when the battery level is below 30%.

Note:

• Typical duration is the average maximum time when fully charged and used intermittently under normal conditions.
• Gear duration is the average maximum time when fully charged and operated continuously in each gear.
  

The motor runs when the Motor Control Trigger is pressed and stops when released.

Press the button in the center of the on-screen control button under the main page to enter the setting page, and then refer to the corresponding key definitions shown on the screen for operation.

Press the button in the center of the on-screen control button under the main page to enter the setting page, and then refer to the corresponding key definitions shown on the screen for operation.

For the depth warning setting, set the warning value according to your needs. When the actual depth reaches the set value, the motor will stop until it returns within the warning limit.

For the depth change rate setting, select a specific value or no restriction. When the rate exceeds the set value, the motor will stop to reduce risks caused by excessive depth changes. This function is disabled when no restriction is selected.

VAPOR Pro uses multiple sensors. Long-distance transportation or prolonged use without calibration may cause parameter drift. Calibration helps improve parameter accuracy.

Do not run it for more than 10 seconds outside the water, to protect the motor. If an abnormal condition occurs, such as a burnt smell, immediately release the trigger to stop the machine and disconnect the power and control systems.

Compatible accessories include a sports camera adapter bracket, diving straps, and a safety rope.

It can connect to the SublueGO APP. After connection, you can use the APP to configure settings, share user data, and access the self-diagnosis and self-cleaning features.

1. After using the product, rinse the machine with clean water and remove attached dirt or stains by shaking it or wiping it with a soft cloth.
2. After cleaning, shake the machine to remove as much residual water as possible.
3. Wipe the machine with a clean, dry, soft cloth.

Note:

1. Do not remove the battery during cleaning.
2. A small amount of water may still flow out of the machine after cleaning; this is normal.
3. Using sharp or hard objects to wipe the product may cause scratches.
4. After cleaning, remove the battery as soon as possible and wipe its exterior with a soft cloth.
5. Place the battery in a cool, ventilated area to dry. Do not use a hair dryer or place it in direct sunlight.
6. For long-term storage, apply grease to the battery terminals and corresponding device contacts to protect them from corrosion.

Battery energy: 384.8 Wh; battery capacity: 13,000 mAh.

5–40°C (41–104°F).

Fast charger: 1.5 h.

It is normal for the charger surface to reach a little high temperature during charging.

When using the battery below 0°C, the battery power will plummet, causing a dramatic reduction in operating time. Charging the battery is strictly prohibited at this temperature.

The rear of the battery features a power display switch and a power display light. Toggle the power display switch and the power display light will show the remaining capacity.

Do not change the battery in the water. Always change the battery in a dry environment and make sure the equipment and your hands are dry.

The battery should be stored in a cool and ventilated place at 25±5℃, with an optimal humidity of 65±20% RH, and the power of about 30-60%.

Note: If the battery is stored for a long time, please check the battery power at least once every 3 months and charge the battery to 60%.

Because the effective capacity of batteries decreases when used in low-temperature environments, which is an inherent characteristic of batteries. If you need to use it at low temperatures, please evaluate the return time.