This product is only suitable for healthy and skilled swimmers over 16 years of age.

It's normal. The motor is not allowed to run in the air atwhichever level of speed. For safety reasons, the product will reduce its speed after 5 seconds when running the motor in the air.

This product is micro-positive buoyancy. In the water off the hands will float to the surface slowly.

• Volumn: 54.4cm(L) ×37.9cm(W ) ×28.8cm(H)
• Weight: 8.7kg (19.2 lb) ,weight includes battery.

The using depth is 0-40m.

Toggle and hold Power Control Switch for 3s.

There are 4 speed gears as below:

• First gear: 6 km/h (3.73 mph);
• Second gear: 8 km/h (4.97 mph);
• Third gear: 10 km/h (6.21 mph);
• Fourth gear: 12km/h (7.46 mph).

Gear 4 is unavailable when battery power is below 30%.
Press the speed gear once to increase it, total 4 speed gears.
When operating at Gear 4, Vapor Pro will automatically switch down to Level 3 after 2 consecutive minutes. Gear 4 is unavailable when battery power is below30%.

• Typical duration: 60 min
• First gear duration: 45 min
• Second gear duration: 30 min
• Third gear duration: 18 min
• Forth gear duration：2min×5 @ Gear 4 + 6min @ Gear3

Gear 4 delivers top speed for up to 2 consecutive minutes before automatically shifting to Gear 3 to prevent overheating. It can be re-engaged immediately and used for up to five cycles (10 minutes total).

The remaining 30% battery capacity provides up to 6 minutes of runtime in Gear 3. Gear 4 is unavailable when battery level is below 30%.

Note:

• Usual duration refers to the average of the maximum time when the equipment is fully charged and operated according to the general use habit (non-continuous operation).
• Gear duration refers to the average of the maximum time when the equipment is fully charged and operated continuously in all gears.
  

Motor runs when Motor Control Trigger pressed, stops when released.

Press the button in the center of the on-screen control button under the main page to enter the setting page, and then refer to the corresponding key definitions shown on the screen for operation.

Press the button in the center of the on-screen control button under the main page to enter the setting page, and then refer to the corresponding key definitions shown on the screen for operation.

Depth warning setting, you can set the depth warning value according to your own situation. When the actual depth reaches the set warning value, the motor will stop running until it returns to within the warning value.

Depth change rate setting, you can set a specific value or not. When the rate of change of depth exceeds the set value, the motor will stop running to avoid the user due to the rate of change of depth is too large and increase the risk of diving disease. This function is turned off when the user selects no restrictions.

Products with multiple sensors. Long distance transportation or prolonged uncalibrated use may lead to distortion of parameters, after calibration can effectively improve the accuracy of parameters.

Do not use it for more than 10S in non-underwater environment in order to protect the motor life. If there is any abnormal state (such as burnt smell, etc.),immediately release the button switch to stop the machine, and disconnect the power supply of the power system and control system .

There are sports camera adapter bracket,diving straps,safety rope.

It can connect to the SublueGO APP. After connection, you can use the APP to configure settings, share user data, and access the self-diagnosis and self-cleaning features.

1. After using the product, please use water to clean the machine, and you can remove the dirt or stains attached to the machine by shaking or wiping with a soft cloth.
2. After cleaning, please shake the machine to remove as much residual water as possible.
3. Wipe the machine with a clean, dry soft cloth.

Note:

1. Do not remove the battery during cleaning.
2. A small amount of water will still flow out of the machine after cleaning, this is normal.
3. If you use sharp or hard objects to wipe the product during cleaning, it will cause scratches.
4. After cleaning, please remove the battery as soon as possible, and use a soft cloth to wipe the external surface of the battery.
5. After cleaning, the battery can be placed in a cool and ventilated place to dry, do not use hair dryers and other equipment or or place it in the sun.
6. For long-term storage, apply grease to both the battery terminals and the corresponding contacts on the device to protect them from corrosion.

Battery specification: 384.8Wh; Battery capacity: 13000mAh.

5-40℃.

Fast charger: 1.5h.

It is normal for the charger surface to reach a little high temperature during charging.

When using the battery below 0°C, the battery power will plummet, causing a dramatic reduction in operating time. Charging the battery is strictly prohibited at this temperature.

The rear of the battery features a power display switch and a power display light. Toggle the power display switch and the power display light will show the remaining capacity.

Do not change the battery in the water,always change the battery in a dry environment and make sure the equipment and hands are dry.

The battery should be stored in a cool and ventilated place at 25±5℃, with an optimal humidity of 65±20% RH, and the power of about 30-60%.

Note: If the battery is stored for a long time, please check the battery power at least once every 3 months and charge the battery to 60%.

Because the effective capacity of batteries decreases when used in low-temperature environments, which is an inherent characteristic of batteries. If you need to use it at low temperatures, please evaluate the return time.