How to use and maintain your WhiteShark Tini!

Hey, diving lovers! Did you read our first blog [Top 10 questions about Sublue WhiteShark Tini answered!]? As with all modular underwater scooters, they do need to be used with caution and maintained carefully. So in today's blog, we are going to give you the rundown on how to get started quickly with your WhiteShark Tini!

*For the button position, please refer to this image.

WhiteShark Tini Single boost mode start-up

1. Press WhiteShark Tini’s power button until the indicator lights are flashing green.

2. Then press and hold the support handle’s power button to power on. Next, press and hold the frequency button until the indicator lights are flashing green to pair your devices.

3. Once connected, both the Tini scooter body’s and support handle’s indicator lights will turn to steady green and will no longer flash, which means the devices have successfully paired.

4. Press the support handle's start-up button to ensure the Single boost mode WhiteShark Tini underwater scooter is rotating and working.

WhiteShark Tini Single boost mode start-up and speed switch

1. Press WhiteShark Tini’s power button until the indicator lights are flashing green.

2. Then press and hold the support handle’s power button to power on. Next, press and hold the frequency button until the indicator lights are flashing green to pair your devices.

3. Once connected, both the Tini scooter body’s and support handle’s indicator lights will turn to steady green and will no longer flash, which means the devices have successfully paired.

4. Press the support handle's start-up button to ensure the Single boost mode WhiteShark Tini underwater scooter is rotating and working.

5. To switch speed, press the support handle’s power button again. The indicator light will turn red to signal that it is in high-speed mode and turn green when it is in low-speed mode. The initial speed is the default low speed.

How to assemble WhiteShark Tini Dual boost mode and start-up

1. Assemble and secure the Double-engine support handle onto the 2 Tini scooters.

2. One by one, press the two Tini scooters bodies' power button until the indicator lights are flashing green.

3. Then press and hold the Double-engine support handle’s power button to power on. Next, press and hold the frequency button until the indicator lights are flashing green to pair your devices.

4. Once connected, both the two Tini scooters bodies' and Double-engine support handle’s indicator lights will turn to steady green and will no longer flash, which means the devices have successfully paired.

5. Press the Double-engine support handle's start-up button to ensure the Dual boost mode WhiteShark Tini underwater scooter is rotating and working.

Installation Guide for WhiteShark Tini Floater

*The floater keeps your WhiteShark Tini from sinking. The floater kit has a mount point for your smartphone and sports camera.

1. Fix the support handle onto the Tini scooter body first.

2. Slide floater onto the support handle and secure it.

3. Align the floater with the mount point and tighten it with the Plug-in special screws.

4. Secure the waterproof phone case to the floater with quick release screws.

Cleaning and Maintenance Instructions for WhiteShark Tini’s rotor

1. Prepare the tools required: plier, pry bar, and cross screwdriver.

2. Insert the pry bar into the gap around the cover, then pry it down gently.

3. Fix the hexagon bolt with a plier, then remove the nut.

4. Remove screws from the grille with the screwdriver.

5. Remove the grille, and pull out the rotor for cleaning.

6. Dry and spray rust remover WD-40.

7. Afterwards, reinstall the rotor, then reinstall the grille.

8. Fix the grille with screws.

9. Reinstall the blade, then the gasket, and finally fasten it with the self-locking nut.

10. Align the gap of the cover with the protrusion of the grille, then press with your hands to ensure they lock together.

WhiteShark Tini can be enjoyed by water enthusiasts of all ages! It is truly the perfect underwater scooter for everyone in your family! WhiteShark Tini can be used for 8-16 years if maintained and cleaned properly. Grab your own WhiteShark Tini to start your underwater adventures today.

WhiteShark Tini
WhiteShark Tini
Whiteshark Tini basic combo
Whiteshark Tini Travel Combo
Whiteshark Tini Family Combo
Whiteshark Tini professional combo
Sublue Whiteshark Tini with Floater
Sublue Whiteshark Tini professional model
Sublue Whiteshark Tini family pooling party
Sublue Whiteshark Tini with inflatable floater
Sublue Whiteshark Tini

WhiteShark Tini

Related Posts

The 5 risks of scuba diving you should know!

The 5 risks of scuba diving you should know!

Mar 18, 2021Sublue Technology Inc.
How to become a great diving buddy!

How to become a great diving buddy!

Feb 23, 2021Sublue Technology Inc.
How to use and maintain your WhiteShark Tini!

How to use and maintain your WhiteShark Tini!

Feb 09, 2021Sublue Technology Inc.
Close